![]() ![]() You can usually force the detection of a monitor within the graphics driver control panel. If the issue is still not resolved after updating the drivers, it may be due to an unusually reported display ID (EDID). Update your graphics drivers from the manufacturer to resolve the issue. ![]() Usually this will be caused by the graphics driver not properly supporting sleep modes and therefore disabling the ability to detect a connected display when the computer goes to sleep. I don't know why there are three configs, I have only ever used one So for some reason one of the configs does not get set correctly. ![]() Moving/resize issue returned, but the lower right corner was set to I changed these to 1600x900 and the problem was solved.įurther I changed resolution (via control panel) to 1920x1080, the The third ( SIMULATED.) were set to 1024x768. Were 1440x900, so they were not involved. Under 00 was another branch also called 00. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers\Configuration That Windows was accessing the following Registry path: Using Sysinternals ProcessMonitor I found This fixes the issue for me now all my window positions and sizes are preserved. When waking from sleep, all my windows had been pushed to one display, and some of them resized. I'm running Windows 8.1 with two 2560x1440 displays on DisplayPort. This is an old question, but if anyone arrives here with the same issue, I suggest trying the solution posted here: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |